1. Permanentmagnet DC brushless synchronous motor: The efficiency is improved by 15%-20%;Save energy; Reduce the consumption of solar panels.
2. 304S/S pump shaft.
3. Stainless steel outlet/connector/ oil cylinder.
4. Doublebearing motor base can work under more axial pressure.
5. Alloymechanical seal: Longer working life and high reliability.
6. Motorcoil is made by automatic winding machine with centralized winding technology,motor efficiency is much improved.
7. Intelligentwater shortage protection: The pump stops working automatically when there isno water in the well, and automatically start working 30 minutes later.
● Permanent magnet DC brushless synchronous motor
● Stainless steel outlet, oil cylinder, connection
● MPPT Controller
3" SCREW SOLAR PUMP | |||||
Model | Power | Voltage | Max flow(m3/h) | Max head(m) | Outlet(inch) |
3DSS0.5-28-12-80 | 80 | 12 | 0.5 | 28 | 0.75" |
3DSS1.2-56-24-120 | 120 | 24 | 1.2 | 56 | 0.75" |
3DSS1.2-77-36-210 | 210 | 36 | 1.2 | 77 | 0.75" |
3DSS1.7-109-48-500 | 500 | 48 | 1.7 | 109 | 0.75" |
3DSS2.0-150-48-750 | 750 | 48 | 2.0 | 150 | 0.75" |
3DSS2.0-150-72-750 | 750 | 72 | 2.0 | 150 | 0.75" |
3DSS2.0-180-72-1100 | 1100 | 72 | 2.0 | 180 | 0.75" |
- 1 x 3inch DC solar screw pump with one 2m cable
- 1 x Pump controler with MPPT function
- 1 x Stainless steel float swith (sensor for tank)
- 1 x Pump outlet joint connector
- 1 x Splice kit for cable join
- 1 x Splice kit for waterproof
- Suitable solar panels. There’re some suggestions in the instruction book.- A stainless steel wire ( called safety cable) to hold pump in bore. If pumping water from dam or river, a float set up required.
- Poly pipe from pump to water tank. ( recommend 1inch or over diameter poly pipe)
- Wire power cable (2 wires plus earth). we recommend cable size at least chicker than the original cable in the pump.
The solar PV system voltage needs to meet the voltage range in the figure below. For example:
The 3DSS0.5-28-12-80 model matches the solar panel voltage between 18V~48V.
3DSS1.7-109-48-500
● Permanent magnet DC brushless synchronous motor
● S/S outlet, oil cylinder, connection
● Plastic impeller
● MPPT Controller
How deep is your well(bore hole)?
How far is the distance between tank and well?
What's you requirement about the flow(L/H)?
Calculate"Actual Pump Head"and find the proper pump with the right head.
Then you can choose the pump you want according todifferent folw and prices.
- 1 x 3inch DC solar Plastic impeller pump with one 2m cable
- 1 x Pump controler with MPPT function
- 1 x Stainless steel float swith (sensor for tank)
- 1 x Pump outlet joint connector
- 1 x Splice kit for cable join
- 1 x Splice kit for waterproof
- Suitable solar panels. There’re some suggestions in the instruction book.- A stainless steel wire ( called safety cable) to hold pump in bore. If pumping water from dam or river, a float set up required.
- Poly pipe from pump to water tank. ( recommend 1.25inch/1.5inch or over diameter poly pipe)
- Wire power cable (3 wires plus earth). we recommend cable size at least same than the original cable in the pump.
The solar PV system voltage needs to meet the voltage range in the figure below. For example:
The 3DPC3-35-24-300 model matches the solar panel voltage between 18V~48V.
4" PLASTIC IMPELLER SOLAR PUMP | |||||
Model | Power(W) | Voltage(V) | Max flow(m3/h) | Max head(m) | Outlet(inch) |
4DPC6-56-110-750-A/D | 750 | 110 | 6 | 56 | 1.25" |
4DPC6-84-150-1100-A/D | 1100 | 150 | 6 | 84 | 1.25" |
4DPC6-112-150-1300-A/D | 1300 | 150 | 6 | 112 | 1.25" |
4DPC6-135-200-1500-A/D | 1500 | 200 | 6 | 135 | 1.25" |
4DPC6-175-300-2200-A/D | 2200 | 300 | 6 | 175 | 1.25" |
4DPC9-45-110-750-A/D | 750 | 110 | 9 | 45 | 2" |
4DPC9-58-150-1100-A/D | 1100 | 150 | 9 | 58 | 2" |
4DPC9-71-150-1300-A/D | 1300 | 150 | 9 | 71 | 2" |
4DPC9-85-200-1500-A/D | 1500 | 200 | 9 | 85 | 2" |
4DPC9.5-125-300-2200-A/D | 2200 | 300 | 9.5 | 125 | 2" |
4DPC13-36-110-750-A/D | 750 | 110 | 13 | 36 | 2" |
4DPC13-49-150-1100-A/D | 1100 | 150 | 13 | 49 | 2" |
4DPC13-54-150-1300-A/D | 1300 | 150 | 13 | 54 | 2" |
4DPC13-60-200-1500-A/D | 1500 | 200 | 13 | 60 | 2" |
4DPC13-110-300-2200-A/D | 2200 | 300 | 13 | 110 | 2" |
4DPC17-48-200-1500-A/D | 1500 | 200 | 17 | 48 | 2" |
Model | DC Voltage range | AC Voltage range | Power | Max flow | Max head |
4DFS5.7-83-750 | 60-380Vmp (60-440VOC) | 90-240VAC | 750W | 5.7m3/h | 83m |
Outlet | Pump size | Cable | PV | Connection mode | Pump body |
1.25” | 4” | 2m | 330W*3 | in series | 4DFS2/7 |
- Submerging depth can reach 150 meters.
How deep is your well(bore hole)?
How far is the distance between tank and well?
What's you requirement about the flow(L/H)?
SOLAR SWIMMING POOL CIRCULATING PUMP | |||||
Model | Power | Voltage | Max flow(m3/h) | Max head(m) | Outlet(inch) |
DLP15-14-48-500 | 500 | 48 | 15 | 14 | 2" |
DLP20-19-72-900 | 900 | 72 | 20 | 19 | 2" |
DLP27-19-72-1200 | 1200 | 72 | 27 | 19 | 3" |
DLP27-19-110-1200 | 1200 | 110 | 27 | 19 | 3" |
With the mass emission of greenhouse gas like carbon dioxide, global warming is a growing problem to face. Renewable energy is thus greatly promoted and applied in developed countries. Government subsidies renewable energy users or allows free tax policy so as to reduce consumption of those non-renewable energy like oil, coal. This significantly helps to save energy and protect environment.
E-Able Solar circulation system is featured with modular design, zero noise and pollution free. It is fully safe and reliable, very easy for maintenance. No battery is required.
E-Able Solar circulation system not only benefits the domestic and commercial users with purified water and advanced swimming pool circulation mode, but also reduces electricity cost with free energy.
SURFACE SOLAR VORTEX PUMP | |||||
Model | Power | Voltage | Max flow(m3/h) | Max head(m) | Outlet(inch) |
DQB2.0-25-24-210 | 210 | 24 | 2 | 25 | 1" |
DQB2.0-30-24-280 | 280 | 24 | 2 | 30 | 1" |
DQB3.0-50-48-550 | 550 | 48 | 3 | 50 | 1" |
DQB3.0-65-72-750 | 750 | 72 | 3 | 65 | 1" |
SURFACE SOLAR VORTEX PUMP PARAMETER
- 1 x surface solar vortex pump with one 2m cable
- 1 x Pump controler with MPPT function
- 1 x Stainless steel float swith (sensor for tank)
- 1 x Pump outlet joint connector
- 1 x Splice kit for cable join
- 1 x Splice kit for waterproof
- 1 x Check valve
- 1 x Product Manual
- Suitable solar panels. There’re some suggestions in the instruction book.
- Poly pipe from pump to water tank ( Choose according to outlet size).
- Wire power cable (2 wires plus earth,1.5 square).
The solar PV system voltage needs to meet the voltage range in the figure below. For example: The DQB2.0-25-24-210 model matches the solar panel voltage between 18V~48V.
PUMP PERFORMANCE | |||||
Model | Power | Voltage | Max flow(m3/h) | Max head(m) | Outlet(inch) |
DCPM6-24-48-550 | 550 | 48 | 6 | 24 | 1" |
DCPM15-14-48-550 | 550 | 48 | 15 | 14 | 1.5" |
DCPM21-14-72-750 | 750 | 72 | 21 | 14 | 2" |
DCPM26-15-72-1100 | 1100 | 72 | 26 | 15 | 2" |
DCPM45-17-110-1500 | 1500 | 110 | 45 | 17 | 3" |
- 1 x surface solar centrifugal pump with one 2m cable
- 1 x Pump controler with MPPT function
- 1 x Stainless steel float swith (sensor for tank)
- 1 x Pump outlet joint connector
- 1 x Splice kit for cable join
- 1 x Check valve
- 1 x Product Manual
- Suitable solar panels. There’re some suggestions in the instruction book.
- Poly pipe from pump to water tank. ( Choose according to outlet size)
- Wire power cable (2 wires plus earth,1.5 square).
The solar PV system voltage needs to meet the voltage range in the figure below. For example:
The DCPM21-14-72-750 model matches the solar panel voltage between 50V~150V.
|